Eska 3.5's , one sat in my garage for 30+yrs has spark , cant get to run

bobd254

Cadet
Joined
Sep 9, 2022
Messages
17
Hi folks,
I've had a 3.5 , made in 1973- model 1945-A nonadjustable main jet, and hadnt used in about 33 years.
I changed the points and condenser and rebuilt the carb. i got it to run briefly on starting fluid, and it sounded nice.
The bowl has gas when i loosened the screw, and it doesnt overflow - but wont start and doesnt seem to be getting any fuel, no fuel smell on the new sparkplug.
Must be something I did wrong on the carb, how do I test if the main jet is working ? or any suggestions on what to do.
Thanks,
Bob

PS I also just bought a 1974 yer - model 1945-B that runs and smokes (originally wanted it for parts if needed ) -and if you open up the top tank valve more than about half a turn, the carb starts to leak gas. It has an adjustble main jet.
 

brim_buster

Lieutenant Junior Grade
Joined
Jul 9, 2013
Messages
1,219
Did you install the pump bladder correctly at 2 o'clock ( the slit in it )
 

bobd254

Cadet
Joined
Sep 9, 2022
Messages
17
Did you install the pump bladder correctly at 2 o'clock ( the slit in it )
Yes. After I put it all back together, I read something about the bowl having to be in a certain direction and the clip for the inlet needle needing to be in a certain way......I hadnt payed attention to this on ressembly. I guess I'll take it apart again.
Is there a way to test that the main jet is open ?
Thanks.
 

brim_buster

Lieutenant Junior Grade
Joined
Jul 9, 2013
Messages
1,219
Yes. After I put it all back together, I read something about the bowl having to be in a certain direction and the clip for the inlet needle needing to be in a certain way......I hadnt payed attention to this on ressembly. I guess I'll take it apart again.
Is there a way to test that the main jet is open ?
Thanks.
Run a piece of wire through it or blow out with compressed air and read this from the manual
 

Attachments

  • carb.PNG
    carb.PNG
    523.2 KB · Views: 4

bobd254

Cadet
Joined
Sep 9, 2022
Messages
17
Thanks, I did get a copy of the manual, I looked at it , now I guess I've really got to read it !
 
Top