Evenrude "Big Twin"

[baxter538]

can anyone help me with information on this outboard? due to a death in the family i am left with this motor and have no idea what size it is or where i could possibly sell it at. are there numbers i should look for? when it was last used 2 years ago it worked great but no one in the family seems to know anything about it. any information would be greatly appreciated.

 

[alcan]

Re: Evenrude "Big Twin"

Hi baxter<br />Look for the model# on the transom clamp. Should be a plate just under the cowl at the front of the motor. If not there try looking for a welch plug about the size of a quarter on the engine block.

 

[baxter538]

Re: Evenrude "Big Twin"

i was finally able to get to the motor today.......any info on the model would be much apreciated....<br /><br />evenrude "big twin" <br />model # 4353D

 

[rolmops]

Re: Evenrude "Big Twin"

Hello Baxter.<br />Are you sure that it was 4353D? Or was it 40353D?<br />4353d would make it a 1940 3.3 hp and not bigtwin.<br />40353d would make it a 1963 40 hp bigtwin.<br />For the 40 horse you can buy a seloc or clymer book with all the info you need and more.The 1940 would be a bit more complicated.<br />good luck

 

[baxter538]

Re: Evenrude "Big Twin"

it is the 40 model......thanx much for the info