Evinrude 1956 30hp LU bearing

[Westopolis]

I've identified the bearing in the lower unit from the exploded view parts diagram as a 20x52.
When I search for that part number nothing comes up. Can someone direct me to a website and the correct part number.

 

[HighTrim]

Re: Evinrude 1956 30hp LU bearing

The superseeded part number is 0307545

Evinrude Johnson OMC 0307545 - Vintage, Ball Bearing @ MarineEngine.com

 

[F_R]

Re: Evinrude 1956 30hp LU bearing

If I am not mistaken, that is a common ball bearing that should be available locally at an auto parts store or bearing house for a whole lot less money. Take the old bearing with you so they can get the numbers off it. It will be a different number than the OEM/Evinrude number.

 

[Bryanjlb]

Re: Evinrude 1956 30hp LU bearing

The idle set screw. To lower the rpm

 

[orbanp]

Re: Evinrude 1956 30hp LU bearing

The superseeded part number is 0307545

Evinrude Johnson OMC 0307545 - Vintage, Ball Bearing @ MarineEngine.com

Is that a special bearing? Because it looks awfully expensive!
Just measure the ID, OD, and width, and look it up on any web page giving ball bearing data. It might be a standard bearing, in that case it should only cost a couple of dollars, as suggested by others as well.

Good luck, Peter

 

[Bryanjlb]

Re: Evinrude 1956 30hp LU bearing

The idle set screw

 

[boobie]

Re: Evinrude 1956 30hp LU bearing

Bryanjib. Don't Hi-Jack a post !!! Read the rules at the top of the forum.