Zebu Fellenz
Cadet
- Joined
- Jul 27, 2007
- Messages
- 6
Hello,
I have a 1961 Evinrude Lark IV with manual shift that is slipping out of gear at higher RPM. It slips out at about 1/2 throttle. When it slips it does not make any sounds (like gear mesh or teeth breaking off a gear) It simply begins to rev up and slow down.
Any Idea's to what may be causing this; I'm pretty good mechanically but don't know much about the inner-working of this motor so please use small words and speak slowly
Thanks,
Erik
I have a 1961 Evinrude Lark IV with manual shift that is slipping out of gear at higher RPM. It slips out at about 1/2 throttle. When it slips it does not make any sounds (like gear mesh or teeth breaking off a gear) It simply begins to rev up and slow down.
Any Idea's to what may be causing this; I'm pretty good mechanically but don't know much about the inner-working of this motor so please use small words and speak slowly
Thanks,
Erik