krisnowicki
Lieutenant Junior Grade
- Joined
- Jul 11, 2007
- Messages
- 1,172
Carbs cleaned, fuel pumps changed, gas tank cleaned, filters new.
So I am setting the carbs to get the best idle. I Set it to the manuals 1 1/4 turn out. It starts Idles and bogs sometimes and dies. If I turn the mix screw out about 1 and half / 2 more turns it idles alot more stable. Is this ok?
Also some times I get a small surge. I have re synced the carbs, but when I adjust the idle cam it doesn't respond like SBC's I am used to working on. Is it nornal to have to crank this thing over 1 full turn to get 50 or so rpms?
So I am setting the carbs to get the best idle. I Set it to the manuals 1 1/4 turn out. It starts Idles and bogs sometimes and dies. If I turn the mix screw out about 1 and half / 2 more turns it idles alot more stable. Is this ok?
Also some times I get a small surge. I have re synced the carbs, but when I adjust the idle cam it doesn't respond like SBC's I am used to working on. Is it nornal to have to crank this thing over 1 full turn to get 50 or so rpms?
