hi again everyone. i just got a faria coral tach pn tc9036a. the guy said it will work for 20 pole stators. the instructions say it wont. there is a selecter switch.
1= 4 pole
2= 6 pole
3= 8 pole
4= 10 pole
5= 12 pole
6= ??????
nothing in the instructions refers to the setting 6. i figure one of two things.
1- the instructions are new and the tach is old and still works on setting 6 for 20 pole stators
2- faria decided to discontinue the internal workings of the 20 pole setting but uses the same mold for the body of the tach, leaving a non working 6 setting.
anyone have any info for me? the dealers around here are not all that knowledgeable. thanks
1= 4 pole
2= 6 pole
3= 8 pole
4= 10 pole
5= 12 pole
6= ??????
nothing in the instructions refers to the setting 6. i figure one of two things.
1- the instructions are new and the tach is old and still works on setting 6 for 20 pole stators
2- faria decided to discontinue the internal workings of the 20 pole setting but uses the same mold for the body of the tach, leaving a non working 6 setting.
anyone have any info for me? the dealers around here are not all that knowledgeable. thanks