Flat Glass Thickness Question

[76SeaRay]

So, this is 1976 vintage glass for windows and windshields (Taylor Made). All of the vinyl and rubber glazing I find is shown for glass that is 1/8 (0.125), 3/16 (0.1875) or 1/4 (0.250) inch. My glass actual measurements run from 0.195 to 2.01 inches. So does anybody know if this is considered 3/16, 1/4 or some other size since it is so old???

Has anybody replaced their glazing on an older boat with aluminum windows and figured out how to read the glazing dimensions on websites to get the right kind/size? Taylor Made shows glazing with profiles (of course you can't buy from them) but their dimensional descriptions are terrible...

Thanks...

 

[Scott Danforth]

that is considered 3/16" glass.

email taylor. or PM me and I can send you the email of the guy at taylor that helped me. I sent pics with dimensions. they identified the stuff and I ordered it. BTW, for the Rogue, it was about $200 in glazing

 

[76SeaRay]

Thanks, sent a PM..

 

[Scott Danforth]

Thanks, sent a PM..

replied

 

[76SeaRay]

Thanks to Scott on the referral of Taylor. They are working on it. I will come back later and close this thread with the results...