FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I know the float is supposed to be set at 11/64th drill bit ... I don't see a tab to adjust the hight tho. Any suggestions. Will buy a new one if need be but this one is in good shape.
Look between the ears on the float that the hinge pin goes thru; There's a tab on the float that bears on the needle to shove it up into the hole when the float comes up. You bend that tab up or down to change the float height.
Look between the ears on the float that the hinge pin goes thru; There's a tab on the float that bears on the needle to shove it up into the hole when the float comes up. You bend that tab up or down to change the float height.
