FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I am replacing the floor in my project boat, and am wondering, the factory used 1/2" flooring. Should I use the same or should I use 3/4"? I have always used the 3/4, but all the boats I have done have had it too.
It really depends on the boat design. In some applications you can eliminate structure by going 3/4". It can save both labor and material compared to 1/2" installations while giving a major increase in strength. I'm doing a project now and the 3/4" ply doesn't need stiffeners like the 1/2" did. Weight gain about the same as one sheet of 1/2" ply (approx 60 sq ft x 1/4" on a 17'r).
I need to replace a piece of wood on the front of my pontoon boat.(which has rotted through) Do I use marine plywood, which is very hard to find in my area, or can I use another type of plywood ?<br />Thanks,<br />Steve
i used a 5/8 marine grade plywood. doesn't really matter about the marine grade but if you get a good one side should do tons. depends on what your going to cover it with. just my 2 cents worth.
