Whats up guys,Ive got a few techy questions here .
2 of my four coils on my force 125 have really loose connection points where there molded to the coil itself.
One of them turns 360 degrees inside the coil although there is spark on them I felt this was not good so I got 2 cdi replacements. The motor starts right up on full idle and has a small miss I am thinkin this is why?
The other thing is I pulled the plugs and the top 2 had black carbin and bottom 2 were clean with fuel on them.
Ive got 140 psi and holding on all four and orderd a fuel pump kit ,adjusted floats cleaned carbs.
any input would be Great
Thanks
2 of my four coils on my force 125 have really loose connection points where there molded to the coil itself.
One of them turns 360 degrees inside the coil although there is spark on them I felt this was not good so I got 2 cdi replacements. The motor starts right up on full idle and has a small miss I am thinkin this is why?
The other thing is I pulled the plugs and the top 2 had black carbin and bottom 2 were clean with fuel on them.
Ive got 140 psi and holding on all four and orderd a fuel pump kit ,adjusted floats cleaned carbs.
any input would be Great
Thanks