Hello,
I have a 1986 125 hp force that just lost spark on #1 and weak spark on #3 or no spark at times. The stator had a little melted glue on the pick-up at #1 & #3 charging coils. Stator is new and dont look or smell burnt. Before I lost spark on #1 I swapped CDI boxes to see if the no spark condition of #3 would follow the CDI box and it did but also now #1 is completly dead. I switched CDI boxes back and cleaned off the glue from the stator and I now have the week spark on #3 and none on #1. Dont know what to do next. I continuity tested triggger, stator and coils and it checked within limits. I have not voltage tested anything. I dont understand what DVA voltage is, cant test this with a standard multimeter. Anyone have any suggestions on which direction I should go???
I have a 1986 125 hp force that just lost spark on #1 and weak spark on #3 or no spark at times. The stator had a little melted glue on the pick-up at #1 & #3 charging coils. Stator is new and dont look or smell burnt. Before I lost spark on #1 I swapped CDI boxes to see if the no spark condition of #3 would follow the CDI box and it did but also now #1 is completly dead. I switched CDI boxes back and cleaned off the glue from the stator and I now have the week spark on #3 and none on #1. Dont know what to do next. I continuity tested triggger, stator and coils and it checked within limits. I have not voltage tested anything. I dont understand what DVA voltage is, cant test this with a standard multimeter. Anyone have any suggestions on which direction I should go???