force 125hp prop.

[yfz450guy]

i am looking for a 12.5 x 21 3 blade for my force 125hp. or a really fast 4 blade. i found a pirahna with interchangable blades, anyone heard of those?
thanks.

 

[rndn]

Re: force 125hp prop.

You just won't get the performance of a good SS prop with the composite prop.

 

[MikDee]

Re: force 125hp prop.

I just picked up a Comprop 4 blade 17' pitch for my 125hp Force, from Comprop.com haven't had a chance to try it yet, because now my motor don't start?

 

[yfz450guy]

Re: force 125hp prop.

that doesn't really answer the questions, does it?
i am looking for another prop. i want either a 3 blade 12.5x21 or a 4 blade. does anyone know where i can find them? i have searhed i can have been able to locate one. i know they are out there.
thanks.

 

[yfz450guy]

Re: force 125hp prop.

You just won't get the performance of a good SS prop with the composite prop.

that doesn't really answer the questions, does it?
i am looking for another prop. i want either a 3 blade 12.5x21 or a 4 blade. does anyone know where i can find them? i have searhed i can have been able to locate one. i know they are out there.
thanks.

 

[yfz450guy]

Re: force 125hp prop.

I just picked up a Comprop 4 blade 17' pitch for my 125hp Force, from Comprop.com haven't had a chance to try it yet, because now my motor don't start?

thanks for the info. i just got done on that site. very informative.
please post back with your results. i am eyeballing the 12.7x19 4blade.

 

[Frank Acampora]

Re: force 125hp prop.

Other than the Comprop, I don't think there are ANY four blade props available. However: If you are open to experimentation (expensive with props) You can check out Merc and Honda props. Reason: if you check the catalogs, The Michigan number is the same for Force and Honda props. Therefore props from other manufacturers for Honda should fit Force. (Should, could, would--If the bulldog had sneakers, if the Gorilla had T*Ts) Hub needs to be 4 1/4 inch diameter and splines need to be 15. Then of course, you need to check hub length. And I think in a previous thread here someone used a Vortex prop. I don't remember--Check back a few days.