Stingray1961
Seaman Apprentice
- Joined
- May 18, 2010
- Messages
- 38
I was just changing my oil in the lower unit mercriuser 1993
4.3 had done a pressure test this spring was good. When I was pumping the oil from the bottom vent hole at first it was clean watching it get pushed out the top vent hole. but as the oil that was lower down came out it was frosty.is that normal
4.3 had done a pressure test this spring was good. When I was pumping the oil from the bottom vent hole at first it was clean watching it get pushed out the top vent hole. but as the oil that was lower down came out it was frosty.is that normal