captainoutboard
Cadet
- Joined
- Mar 25, 2010
- Messages
- 8
Have a 1995 tohatsu m25c2, can not for the life of me, get the nut off the flywheel. I have a flywheel holder tool that uses the three holes to hold the flywheel. I have used penetrating fluid, I have heated the nut. Neither have worked. In fact, broke the three brass screws holding the tool in place when trying to torque the nut off with breaker bar on the end of 18" 1/2" drive wrench. Any help would be appreciated. These are not backward threads are they?
