Fuel Hose Size - pump to carb 50573B

[JerEazy]

I need to replace a section of fuel hose form the pump to the top carb

https://www.iboats.com/shop/engine-parts/1975-Evinrude-50573B-Fuel-Pump-Parts.html

Part # 9 in this picture 033395

I was hoping this is standard fuel hose i can cut and clamp - but it doesn't give the O/D or I/D specs that i can find. If anyone could assist with that information i would appreciate it.

Thank you

 

[F_R]

If I am not mistaken, that is a molded hose, and the reason it is so expensive. Standard hose may kink if you try to bend it that sharply.

 

[JerEazy]

I was worried that might be the case - previous owner put fuel hose in there that is kinked. Was hoping maybe he just used the wrong size. I still get fuel flow - just makes me nervous.

Thank you