Re: Fuel mixture setting procedure 1974 75hp Chrysler
Speed...you really need a manual...I have an extra Seloc Manual that covers that procedure and if you could come over today I would let you use it. I assume you are referring to the lo speed jets...after you set timing, replace plugs and get everything properly tuned, carefull set the lo jet screws at 1.5 turns out from bottom...You need a test tank to fine tune the idle( must be under load...in gear). You adjust one carb at a time until you get it idling as smooth as possible. Easy trick if you have done this...might take some time if it's the first...just a Thought
