fuel pumps

[circle hook]

does the I Boat store carry older fuel pumps that what is on the site I need one for a 1964 18HP Evinrude Serial# 18402D I looked it up on their boat store but can't seem to match mine up with anything they list. again Thanks Bob

 

[tashasdaddy]

Re: fuel pumps

1956-89 Universal replacement pump for most small Johnson Evinrude Gale motors

http://www.iboats.com/Fuel-Pump-Sierra/dm/*******.660140584--**********.780738567--view_id.174139

 

[circle hook]

Re: fuel pumps

Tashasdaddy is it the one part# 18-7350 it dosen't say 18HP only up to 15HP, But the gasket between the block and punp kind of looks the same, do you think I should go with it.

 

[F_R]

Re: fuel pumps

Tashasdaddy is it the one part# 18-7350 it dosen't say 18HP only up to 15HP, But the gasket between the block and punp kind of looks the same, do you think I should go with it.

The mounting bolt pattern is the same on all motors. The differences lie in the direction that the hose fitting points. If the hoses can be re-routed to clear any obstructions, it will work just fine. The "big" inlet hose fitting can be re-positioned in any of four positions. Note that you are not supposed to mount the pump upside down because it could air-lock.

The 18-7351 is another option, usually more forgiving of hose direction.

 

[Chris1956]

Re: fuel pumps

Circle, Can you not get a rebuild kit for the original?

 

[circle hook]

Re: fuel pumps

No that's not the problen, one of the plastic barb fittings that is molded to the pumps body is completey snaped off, so I just bought a new one from I Boats web store. Thanks Bob