Gas Gauge not Working???

rickdb1boat

Supreme Mariner
Joined
Jan 23, 2002
Messages
11,195
I was wondering where to start trouble shooting my Gas Gauge on the console? It is on a 1989 boat, so I assume it's the original. It just sits on empty! I just got the boat, so I not to familiar with Gas Gauges, as all my others had the 6 Gal. tanks. It's a 25 Gal.Plastic tank and I checked to make sure all the wires were tight, but nothing! Any instructions would be greatly appreciated! Thanks, Rick
 

scallywag

Seaman Apprentice
Joined
May 4, 2002
Messages
30
Re: Gas Gauge not Working???

I BET ITS THE FLOAT STUCK IF LEFT WITH LITTLE OR NO GAS FOR A TIME IT PROBABLY STICKING.TRY GIVING IT SOME ENCOURAGEMENT(a good wiggle).
 

mnmfors

Petty Officer 2nd Class
Joined
Nov 18, 2001
Messages
176
Re: Gas Gauge not Working???

or maybe the ground wire??? I would check all connections...float side and guage side...just a suggestion.<br /><br />Good luck.
 

Boatist

Rear Admiral
Joined
Apr 22, 2002
Messages
4,552
Re: Gas Gauge not Working???

Could also be dash gas guage sticking. Fill tank up and fire it up then tap guage. I assume this plastic tank has the standard mechcanical guage mounted on it, does it work right?? With a meter check voltage coming from sending unit on tank. Reading should change as fuel is used or filled up.
 
Top