Glastron GXL 235 anti siphon valve location?

TXGlastron

Cadet
Joined
Jan 22, 2022
Messages
28
Once again, I feel stupid. I’m certain I should replace my anti siphon valve. It’s original on this boat I bought. I can’t figure out how to access it.

The gas line into the fuel/water separator is obvious. Tracing back from this filter, the line goes from the engine bay forward into the subfloor area. I don’t see any access panels to get to that area. Is there something under the carpet I’m missing?

I have gone from boating amateur numbskull to just amateur over the last few years. But maybe I’m back to numbskull based on whatever the answer is to this.

Thank you
 

Lou C

Supreme Mariner
Joined
Nov 10, 2002
Messages
13,277
There has to be access to the fuel tank connections and fuel gauge wiring. Sometimes it’s a round cover screwed into the deck, about 5-6” in diameter. My boat has a rectangular panel that can be removed…the anti siphon valve is screwed onto the fuel pick up tube. The fuel line from the pump/filter connects to it….
 
Top