Glen-L WB Power Skiff Build

[archbuilder]

Sounds like you have been busy! Its a little usual to see cans in a shop, I was wondering why you went that direction. Keep up the good work! and I have some plugs that need terminated in the Hangar if you get bored!

 

[zool]

Sounds like you have been busy! Its a little usual to see cans in a shop, I was wondering why you went that direction. Keep up the good work! and I have some plugs that need terminated in the Hangar if you get bored!

Thanks Arch, yeah, there is a method to my madness. The way the ceiling joists are sistered for the 36' clear span, there are only a few areas that are 24" spacing to fit the florescent fixtures flush mounted. They are the centers of the (3) 12 x 20 work areas.The rest of the joist spacing is 22 1/2" so no fit. So I ran the down lights over all the counter areas and in the hall areas at 4' spacing. I wanted flush mount lighting because the ceiling is only 8' and ive broke a few bulbs over my head swinging boards in the past lol.

Plus they will look good in the pine planking

 

[archbuilder]

Figured it was something like that. woodworking projects are good at taking out surface mounted light fixtures......just keep looking down till the glass quits falling lol

 

[nurseman]

Figured it was something like that. woodworking projects are good at taking out surface mounted light fixtures......just keep looking down till the glass quits falling lol

I've lost track of how many times I have had to do that...usually followed by several choice phrases which I shall not repeat here.:mad2:

 

[zool]

Update:

Finally got the hull all sanded again.

Then I tinted some resin and put on a barrier coat. I decided to use tinted resin in place of the DPLF, because I need that for another project. I plan to give it a final fair over the 1st coat of resin with tinted filler, then a few more coats and a final sanding before the build primer.

Its too cold to paint now anyway, so I may as well keep fairing. Still need some shaping on the nose too.

 

[oldrem]

Looking great

 

[archbuilder]

Looking good Mr Zool!

 

[kcassells]

Lot a work going on there Larry! Looking nice!

 

[zool]

Thanks guys, temps are headed in the wrong direction next week, hoping to at least finish fairing, any maybe pre drill for the hardware.

 

[sphelps]

She’s gunna look great !

 

[Pcolafisher]

Have you made progress this summer?
Cheers

 

[jbcurt00]

Have you made progress this summer?
Cheers

Please observe iboats 90day inactivity rule and avoid posting to topics w no new posts in the last 90days.

 

[zool]

Have you made progress this summer?
Cheers

Not much pcola, I did move the boat and cradle to my spray area, but im still bogged down with farm work, pay the bills work, and house work

Im hoping to get the primer sprayed this month, and maybe the white bottom coat. Then I can flip it back over and finish the wood work.

The admiral says I have to finish siding the house before I can play with my toys.

 

[Pcolafisher]

Thanks! Life does have a way of diverting our best intentions!
Cheers