Great Idea for Gas Lever for Twin Engine

longstand

Petty Officer 1st Class
Joined
May 2, 2009
Messages
293
OK. have you ever found sometimes its difficult to Put your boat into forward and reverse and then push it to give some gas?

well i have a problem with my boat. or maybe its just me..

when i dock my boat. i found it nerve braking to dock it. because when i try to give a little gas it give more than i want it to give. Why because it use cable which may not be so sensitive to what you want it to be.

Solution! or Idea:

I will remove the Gas Cable OFF my Lever for both Engine.

I am going to install a Device directly to the Shaft where the main butterfly on a carburetor to allow air into the engine which give gas.

What Devices will this be. i have an idea but have not found it yet. but i know there is something i could use..

Remote Control Gear Box for Remote Control Cars which could be purchase from Hobby SHOPS for Cheap which is Sensitive, which mean. you move the level or dial the Gear box move, in which it will open the Butterfly on the Carburetor.

If you have any idea of what other devices that could do the same please let me know..

What do you guys think of this??
 

cr2k

Captain
Joined
Mar 19, 2009
Messages
3,730
Re: Great Idea for Gas Lever for Twin Engine

It's called a control box. They work great with good cables and when they are cleaned and lubed once in a while.
 
Top