Benny1963
Lieutenant
- Joined
- Sep 17, 2006
- Messages
- 1,476
im putting a 150 1981 evinrude v6 back together [powerhead replacement]
i took pictures and have diagram .but i have one 3 inch black ground wire
that i dont know were it goes the motor is wired all coils have grounds
the ground from the bumper braket to the pan bolt is on ,the regulater is grounded ,the black wire to selinoid ground is on for ignition at selinoid
my selinoid is held by braket does this groung wire go from the ignition ground on selinoid to the motor . also my primer ground is on can any one tell me were it may go .
thanks bennyb
i took pictures and have diagram .but i have one 3 inch black ground wire
that i dont know were it goes the motor is wired all coils have grounds
the ground from the bumper braket to the pan bolt is on ,the regulater is grounded ,the black wire to selinoid ground is on for ignition at selinoid
my selinoid is held by braket does this groung wire go from the ignition ground on selinoid to the motor . also my primer ground is on can any one tell me were it may go .
thanks bennyb