Grumman hull #'s

[floatingwoody2006]

Hello again friends..I will be buying a nice 16' grumman very soon with a 30hp merc,and galvie trailer for 8 washingtons, but i cant seem to find any reference for older grumman boats. I did however find a fleabay auction that has the SAME boat.. right down to the paint. The one im buying is in a bit better shape as it doesn't leak a drop, but the boat is the same other than the one im getting has no flooring - bimini or steering column in it. Looking at this one gives me hope that i can put a nice bimini top on it, and steering throttle controls. The one in the ad has hull #'s GBM154151485 and if anyone can help me find info on these numbers, i can reference the one im getting. here is the fleabay auction . any reference to late 80's grumman boats would be very appreciated. It's a long shot i know, but im hopefull.. Thanks.

url]http://cgi.ebay.com/ebaymotors/16-FT-GRUMMAN-FLOUNDER-STRIPER-NEW-JERSEY-NJ_W0QQcmdZViewItemQ
categoryZ63725QQihZ004QQitemZ140208347123QQrdZ1QQsspagenameZWDVW[/url]

 

[tashasdaddy]

Re: Grumman hull #'s

http://forums.iboats.com/showthread.php?t=235232

 

[floatingwoody2006]

Re: Grumman hull #'s

Awesome. Thanks once again tashasdaddy. Im starting to think you have a Cat5 cable attached to your person. That verifies it's a grumman, but sadly no good bits other than grumman was purchased by OMC. With the luck ive had with OMC motors, im not unhappy about that fact..With the 5 feet of snow i just removed from my roof, im just licking my chops for open water. How's the weather where you are?