Bustedknuckle84
Chief Petty Officer
- Joined
- Sep 29, 2010
- Messages
- 421
Hull is a 2003 cape craft as described in the signature. I wanted to replace the seals around rod holders on the gunwale because the boat owner before me didnt know what he was doing. I pulled the rod holders our to see the top of the gunwales have foam but also has water in it. Very scared that the bottom of the hull has water in it now.
When I squeeze most of the foam I pulled out has water in it. What can I do, any way to air it out? Vacuum it? is their a fix? please help...
I dont wanna have to separate the top part of the boat from the bottom. Now the foam I pulled out and had on the deck dry out completely.
I have had an on going issue with the boat leaning to the starboard side and have to use about 50% (starboard) trim tab to keep boat even. I have a counter rotate motor but haven't found a fix yet. Hope this isnt the reason.
When I squeeze most of the foam I pulled out has water in it. What can I do, any way to air it out? Vacuum it? is their a fix? please help...
I dont wanna have to separate the top part of the boat from the bottom. Now the foam I pulled out and had on the deck dry out completely.
I have had an on going issue with the boat leaning to the starboard side and have to use about 50% (starboard) trim tab to keep boat even. I have a counter rotate motor but haven't found a fix yet. Hope this isnt the reason.