FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Can someone tell me where to find the starter solenoid on my 1966 Evinrude Ski twin 33hp? The motor didn't come with the other end of the wiring harness and I'm having trouble figuring out all the electrical components.
Does it have a number on the solenoid? If you had the part number you could maybe find it easier online. You might want to call a local Evinrude dealer, they could probably tell you. I found your starter on ebay, but nothing else.
The solenoid should be close to the starter but from your pics i dont see it. It will go between (+) battery wire and starter. You will have to get one and install it. Good luck
Trace the wires that are attached directly to the starter. They should run from the starter to the solenoid. Alternatively you could trace the power wire from your ignition switch as well, I think it should end up at the solenoid right?
That black wiring harness coming out the front of the motor should go to an external junction box, usually mounted separately on the back of the boat somewhere. The junction box contains the starter solenoid, and has another wiring harness coming out of it going to the front of the boat and the ignition switch.
I have the same year outboard. It is an external mounted starter solenoid. Mine was mounted in the right rear of the boat in a weatherproof box. follow the engine wiring harness and it will go to the box.
Thanks alot for the help everyone. I'll be keeping my eye out for a junction box. Is it possible to make my own if I got the starter solenoid? What is a good place to look for a junction box? Looks like ebay only has boxes for large HP tilt/trim units.
Thanks alot for the help everyone. I'll be keeping my eye out for a junction box. Is it possible to make my own if I got the starter solenoid? What is a good place to look for a junction box? Looks like ebay only has boxes for large HP tilt/trim units.
You can make your box or just install the solenoid under the cowl. There is no reason why it has to be external. Mercury had a similar solenoid and they mounted it right on the side of the starter housing. It was the perfect spot for it.
