Help! need sediment bowl for a West bend outboard

[newportrider]

I am finally getting around to working on this little WestBend and the sediment bowl is missing! It was replaced with a piece of pipe with the end welded over and a piece of rubber for a gasket!! It is ser. 287 mod. 150202
tillitson carb MD59A, if anyone has one they want to sell Im interested.
TIA,
Larry

 

[tin knocker]

Re: Help! need sediment bowl for a West bend outboard

It may be the same as on Elgin. Try a post on aomci.com ask a member webvertise page.

Rollie

 

[eurolarva]

Re: Help! need sediment bowl for a West bend outboard

What size motor and model number. West bend became chrylser and later force. The fuel pump should be standard with the newer ones however they no longer have a glass sediment bowl. My 67 45 HP has a glass sediment bowl on it and it is during the chrysler years. Does the fuel pump have a figure 8 shape and about 6 inches long?

 

[newportrider]

Re: Help! need sediment bowl for a West bend outboard

The engine info is in my first post. I can't get the year, it has the manual pull start, no rewind:/. I'm sure it predates chryslers takeover. The carb is a tillitson MD59A that is all the info I have.

 

[eurolarva]

Re: Help! need sediment bowl for a West bend outboard

The model number is 150202? Is this a 15HP motor? Does the fuel pump look like a figure 8 like in this diagram?

 

[newportrider]

Re: Help! need sediment bowl for a West bend outboard

The model number is 150202? Is this a 15HP motor? Does the fuel pump look like a figure 8 like in this diagram?

No the motor is only small like 3 hp maybe. The numbers are very clear, and that's what it is. I forget what the fuel pump looks like , I haven't had time to get back at it.