bermbuster
Recruit
- Joined
- Jun 15, 2020
- Messages
- 3
My boat is a '94 Four Winns 190 Horizon with the 5.8L Ford with a Cobra outdrive. I'm replacing the impeller, twhere the pump is on the engine, not the outdrive. I bought a kit that includes the o-ring and gasket. I did not pay good enough attention when taking it apart, and can't remember what side of the wear plate the gasket goes.
I looked for a diagram, but found a video on utube, and a young guy showing how to replace the impeller with a pump that looks just like mine.After watching that, I was left with more questions than answers. Do I just jam the impeller in the housing? Couldn't I use a lube, wouldn't that make it easier? When it came time for the gasket, he used 2, one on each side of the wear plate; the triangle (the same as the old one I took off), and a round one with a bunch of holes, where none really match up. Tell me that video was supposed to be a joke! Thanks for any help.
Hope to get this done, will be my first time on the lake this year.
I looked for a diagram, but found a video on utube, and a young guy showing how to replace the impeller with a pump that looks just like mine.After watching that, I was left with more questions than answers. Do I just jam the impeller in the housing? Couldn't I use a lube, wouldn't that make it easier? When it came time for the gasket, he used 2, one on each side of the wear plate; the triangle (the same as the old one I took off), and a round one with a bunch of holes, where none really match up. Tell me that video was supposed to be a joke! Thanks for any help.
Hope to get this done, will be my first time on the lake this year.