Help with part # please.

[muskie hunter]

I have a 1996 Wellcraft 26SE Excel 7.4 bravo II.
When I winterized it I removed the thermostat housing to add antifreeze. I want to put in a new thermostat and gasket, but I cannot for the life of me figure out which part # I need to order from Iboats. I want the thermostat and any other gasket that goes along with it. Could someone help me out?

 

[Gary H NC]

Re: Help with part # please.

Not sure but this may be what you are looking for.Give them a call,they have good tech support.Or check with Napa and have them look it up in the Marine parts book.
http://bpi.ebasicpower.com/pc/MAL9-43152/MER8D/Thermostat+Kit%2C+Mercruiser+GM+V6-V8%2C+Ford++V8

 

[muskie hunter]

Re: Help with part # please.

Not sure but this may be what you are looking for.Give them a call,they have good tech support.Or check with Napa and have them look it up in the Marine parts book.
http://bpi.ebasicpower.com/pc/MAL9-43152/MER8D/Thermostat+Kit%2C+Mercruiser+GM+V6-V8%2C+Ford++V8

Thanks a bunch, I will call them and see what they say.This marine stuff is so confusing. Much more difficult than calling Advanced aut and telling them you have a honda accord and you need a thermostat and gasket.

 

[Gary H NC]

Re: Help with part # please.

Napa can be good if you get someone that will actually look in the Marine parts book.All the parts are made by Sierra and use the same part numbers as Napa.
Ebasic has been very good for me.I order from them all the time.