Help!!

[Morel_Master]

i got a mint 67' 5 hp, i rebuilt the caarb today myself, and now it seems like it isnt getting gas into the cylinder, it allows me to blow in the incoming fuel line so its not a stuck needle, dang this thing is so clen, i cnt believe its giving me such trouble, it has spark!!

 

[JB]

Re: Help!!

When you rebuilt the carb did you remove the welch plug on the top of the throat and clean out the tiny orifices in the bottom of the throat? Those are how the fuel gets into the airflow and often get overlooked.

 

[Morel_Master]

Re: Help!!

i removed the flywheel just now and took a pic...can i get an opinion on these, i have no clue what im looking for..

 

[Morel_Master]

Re: Help!!

there seems to be some difference in the points....how do i set these to specs?

 

[Rick.]

Re: Help!!

http://forums.iboats.com/engine-fre...-change-coils-set-points-old-omcs-294072.html
From Top Secret Files at the top of this forum. Your coils look great and have been replaced at some point. Best of luck. Rick.

 

[Morel_Master]

Re: Help!!

the whole motor is original, was never ran more than an hour at best since 1967

 

[Morel_Master]

Re: Help!!

set the points, took the carb back apart, i had forgot te needle valve spring!!! this thing is a real runner!!!