Re: Horizen 230 drainage issue
Hmm, I'd like to know how they are securing these tanks in the newer FWs. In my old one, the tank (alunimum) has mounting tabs welded to the tank. There were wood mounts attached to the central stringers that the tabs were screwed to. When I rebuilt mine, I saw that the tank was in a compartment with a floor section built up that was at the same level as the ski locker. Limber holes in the front and rear bulkheads so it could drain. I made stronger mounts out of mahogany to mount the tank and made braces to brace the floor hatch over the tank.