Hose to tell tale fitting specification help

[aok47]

Hi there,
What type of hose (spec & inside diameter) should I use to replace the hose from crankcase to telltale. I found the part number (0331215) but cant seem to find details
Outside diameter of hose measures 0.416" (10mm) and inside diameter approx 0.23" (6mm).
Appreciate your help!
AK

 

[racerone]

Factory hose might be 5/32" ID measurement.

 

[aok47]

Item "24" in exploded view below:


https://www.crowleymarine.com/johnson-evinrude/parts/51116.cfm?mdl=MNBFC6
Trying to find what I should use as replacement hose.
cheers
AK

 

[Faztbullet]

1/4 fuel hose from any auto supply...

 

[F_R]

0331215 is a special molded hose. Regular hose may not bend sharp enough without kinking.

 

[iggyw1]

If you use a "regular" hose and it won't bend sharp enough without kinking, just add an elbow to it and you should be all set to go.

 

[Faztbullet]

I use regular hose and just loop it over head