How do replace a 1990 Trophey 150 Force to a Johnon 150 - Brackets dont match !

[oldtacklebox]

I would like to replace my 1990 Trophy Bayliner 150PH Force with a 1983 Johnson 150. After I removed my Force motor I found that the bracket mount and boat holes are different and the Johnson motor mount bracket was a lot smaller then the Bayliner :facepalm: The bracket doesnt fit completely onto the transom wall . The bayliner wall is thicker and the bolt holes are straight and spaced apart. I need to know how to make this transition .

I need to get the transom bracket to fit right. Please help!

If anyone out there knows how to make this transition please send me photo's and instructional help .

 

[Bob_VT]

Re: How do replace a 1990 Trophey 150 Force to a Johnon 150 - Brackets dont match !

Welcome aboard.

Any holes not properly aligned or not used need to be filled with epoxy. Epoxy because if you need to re-drill you can.

Take a look at these and see if they might help with your "fit" problem http://www.iboats.com/Transom-Wedge/dm/*******.458660796--session_id.899223019--view_id.40151