How long before going back in water after applying 3M5300 or Gluv it?

[Kbec10]

I have not done it yet, but I may have to apply some 3M5300 or Gluv it stuff on my little 12' aluminum boat on the weekend...How long do I have to wait to put the boat back in the water?

 

[Hooty]

Re: How long before going back in water after applying 3M5300 or Gluv it?

What do the directions recommend?<br /><br />c/6<br /><br />Hooty

 

[Kbec10]

Re: How long before going back in water after applying 3M5300 or Gluv it?

I haven't bought the stuff yet.. I was just wondering because my little girl will want to go in the boat this weekend and she might not be able to... Just wanted a ball park idea...

 

[oldboat1]

Re: How long before going back in water after applying 3M5300 or Gluv it?

I believe the instructions say that 5200 sets up in 24 hours, but takes 7 days to cure. It follows that you have to wait for full cure if you want to be absolutely sure. On the other hand, water aids the curing....<br /><br />You can also get the quick curing stuff (red and white tube) -- goes on the same, and sounds like a better choice for your intended use.<br /><br />Gluvit is probably an overnight cure, like most epoxy, but I haven't tried it. West System would be ready in about 24 hrs.