How many quarts of oil for a fresh rebuild Mercruiser 260 1981

chris0061

Chief Petty Officer
Joined
Jun 17, 2007
Messages
446
Just go a new engine rebuilt all new internals high volume oil pump. I put 5.5 quarts in like manual says and it's up to the add mark. Is this normal or is my dipstick to short? Thanks in advance.
 

Bifflefan

Commander
Joined
May 27, 2009
Messages
2,933
Re: How many quarts of oil for a fresh rebuild Mercruiser 260 1981

it just has little bigger pan than the one you had. fill it to the full line and you will good.
 

chris0061

Chief Petty Officer
Joined
Jun 17, 2007
Messages
446
Re: How many quarts of oil for a fresh rebuild Mercruiser 260 1981

it's the same pan I had on my other block
 

Bt Doctur

Supreme Mariner
Joined
Aug 29, 2004
Messages
19,390
Re: How many quarts of oil for a fresh rebuild Mercruiser 260 1981

12 qts plus 1 for the filter, that is assuming you put a 12qt oil pan on when you installed THE HI-VOLUME PUMP.I will gaurantee that with a standard pan you WILL LOSE the rod bearings the first time you get to 4400rpm.
 

chris0061

Chief Petty Officer
Joined
Jun 17, 2007
Messages
446
Re: How many quarts of oil for a fresh rebuild Mercruiser 260 1981

12 qts???? The book said the engine holds 5.5 qts
 

chris0061

Chief Petty Officer
Joined
Jun 17, 2007
Messages
446
Re: How many quarts of oil for a fresh rebuild Mercruiser 260 1981

ok, I see what your talking about now. He put my standard pan on I'll call him tomorrow and find out about the bigger pan.
 

Bt Doctur

Supreme Mariner
Joined
Aug 29, 2004
Messages
19,390
Re: How many quarts of oil for a fresh rebuild Mercruiser 260 1981

A hi-vol pump will such all 4 qts of oil out of the pan in a hurry.leaving the pump sucking air and leading to bearing failure. a 12qt may not fit in the boat beacuse of the deep sump, that requires a longer deeper pick-up tube from the oil pump.A hi-vol is not necessary for a normal motor. The standard pump works just fine.
 
Top