How often will you change elbow gaskets on 5.7L Volvo GSI

Lupus

Seaman
Thread starter
Joined
Apr 3, 2008
Messages
53
Hi,

I just had new manifolds/ elbows and gaskets installed and plan on checking the torque of the 4 elbow bolts every season. However how often should I replace the elbow gaskets to avoid a possible leak (water in cylinders). I am running in salt water and with a raw water cooled set-up. From every trip I flush the engine with freshwater though. Every season I do abt. 50 hours on the engine.... Any idea ? - Want to take good care of the engine and try to avoid expensive repairs....
 

jerryjerry05

Supreme Mariner
Joined
May 7, 2008
Messages
18,196
Re: How often will you change elbow gaskets on 5.7L Volvo GSI

Usually once they are on they stay that way.If they develope a leak it's usually right away.But if you want to make sure then you can do it evey year. I wouldn't if it were me.Once a riser/manifold mating surface starts to rot then working on it or changing gaskets on it it can cause more trouble.J
 

Lupus

Seaman
Thread starter
Joined
Apr 3, 2008
Messages
53
Re: How often will you change elbow gaskets on 5.7L Volvo GSI

Hi again,

Thanks for this info - makes sense. I will only check the torque of the bolts once a season then. However please tell me when you guys will suspect the manifolds/ elbows to be worn out... every 5th year or so when running in salt water?? - Better safe than sorry.
 

bruceb58

Honorary Supreme Mariner
Joined
Mar 5, 2006
Messages
30,824
Re: How often will you change elbow gaskets on 5.7L Volvo GSI

OEM manifolds/risers or aftermarket?
 

Lupus

Seaman
Thread starter
Joined
Apr 3, 2008
Messages
53
Re: How often will you change elbow gaskets on 5.7L Volvo GSI

The ones I bought were not OEM parts but they are not the cheap chinese parts (GLM or similar). They are US made (from Michigan Motorz) - ard. USD 650 (2 manifold and 2 knees).
 

Lupus

Seaman
Thread starter
Joined
Apr 3, 2008
Messages
53
Re: How often will you change elbow gaskets on 5.7L Volvo GSI

Looked up my invoice - Manifolds/ Knees from New Barr Marine/ US produced.
 
Top