where on the motor can i find out the year it was made in.
A assassins42 Cadet Joined May 29, 2012 Messages 8 Jun 15, 2012 #1 where on the motor can i find out the year it was made in.
R Rick. Captain Joined Jul 30, 2006 Messages 3,740 Jun 15, 2012 #2 Re: how to figure year out There should be a tag on the transom plate with a model number on it. Post the model number here and someone will help you. Best of luck. Rick.
Re: how to figure year out There should be a tag on the transom plate with a model number on it. Post the model number here and someone will help you. Best of luck. Rick.
B boobie Supreme Mariner Joined Nov 5, 2009 Messages 20,826 Jun 15, 2012 #3 Re: how to figure year out What horsepower ??
A assassins42 Cadet Joined May 29, 2012 Messages 8 Jun 18, 2012 #4 Re: how to figure year out its an 85 hp
A assassins42 Cadet Joined May 29, 2012 Messages 8 Jun 18, 2012 #5 Re: how to figure year out Model#85895c serial#j0004465 the hood says 85hp evinrude
A assassins42 Cadet Joined May 29, 2012 Messages 8 Jun 18, 2012 #7 Re: how to figure year out Which numbers did you go by does the j stand for johnson or is it an evinrude. Also are there numbers anywhere on the engine other than transom
Re: how to figure year out Which numbers did you go by does the j stand for johnson or is it an evinrude. Also are there numbers anywhere on the engine other than transom
StickyWidget Seaman Joined Aug 2, 2011 Messages 72 Jun 19, 2012 #8 Re: how to figure year out The model #85895C matches an evinrude 1978 85HP, http://shop.evinrude.com/media/document/ModelNumberReference.pdf There maybe a silver plug about the size of a quarter on top of the powerhead with the model # stamped in it. This is a picture of mine from a 76 75HP Evinrude. It is located on mine right beneath the lifting hook. Johnson and Evinrude model #'s from my limited experience don't look anything alike.
Re: how to figure year out The model #85895C matches an evinrude 1978 85HP, http://shop.evinrude.com/media/document/ModelNumberReference.pdf There maybe a silver plug about the size of a quarter on top of the powerhead with the model # stamped in it. This is a picture of mine from a 76 75HP Evinrude. It is located on mine right beneath the lifting hook. Johnson and Evinrude model #'s from my limited experience don't look anything alike.
