How to re-assemble Quicksilver shift throttle...

[kevink82]

I replaced all my wood and vinyl and am now in the re-assemble mode. When I took my Quicksilver throttle control off the shift linkage fell out before I could note how it is assembled. Does anyone have any links detailing the re-assembly of the throttle specifically the shift linkage? This is a 1987 model. Thanks. Kevin

 

[JustJason]

Re: How to re-assemble Quicksilver shift throttle...

Man o man you can be in a world of hurt with that. Controllers are a pain to put together if they fall apart, or if someone tries to take them apart.

That being said..... Merc has used a bunch of controllers over the years... Your best bet is to post a picture of what you have and go from there. Depending on what control box you have I'm sure we can get you a manual for it.

Btw I don't know who you use for a mechanic but i'm just over the line

 

[kevink82]

Re: How to re-assemble Quicksilver shift throttle...

Where you is? Come hither and I shall pay you!

 

[JustJason]

Re: How to re-assemble Quicksilver shift throttle...

I just send you a PM Kevin.