How to remove throttle assembly?

[thehemi]

2007 Bayliner 185 with MerCruiser 4.3

I need to bypass/test the lanyard. How do I remove this assembly? It seems as though the button must come off somehow, but it doesn't seem to come off easily.



Thanks!

 

[GA_Boater]

Re: How to remove throttle assembly?

THROTTLE-ONLY BUTTON

1. Place the control handle in the neutral position.
2. Push the throttle‑only button in until it stops.
3. Hold the throttle‑only button in and rotate the remote control handle to the forward
position.
4. Use a flat blade screwdriver to gently pry the throttle‑only button out of the control
handle.

The control handle is painted, so protect it from scratches.

 

[thehemi]

Re: How to remove throttle assembly?

Thanks for the instructions.

I was able to remove the lanyard connector w/o removing the throttle assembly. Although I plan to replace my trim switch before long, so these instructions are going to be necessary anyways. Thanks again.

 

[Don S]

Re: How to remove throttle assembly?

Thanks for the instructions.

I was able to remove the lanyard connector w/o removing the throttle assembly. Although I plan to replace my trim switch before long, so these instructions are going to be necessary anyways. Thanks again.

Why?
Seldom is trim/tilt problems due to the switch in the handle.

 

[thehemi]

Re: How to remove throttle assembly?

Why?
Seldom is trim/tilt problems due to the switch in the handle.

The trim works fine when it engages, but it seems to occasionally not make positive engagement upon first or second press of the button. Figured it might be wearing out, corroded or whatever else.