howo make a fiber glass bow sprit

[bertram18]

Hi al i have a bertram 18 and i would like to make bow sprit so i can leave my anchor on it as later on Im going to put an anchor winch on but i dont no where to start. Any help will be great.

 

[chriscraft254]

Re: howo make a fiber glass bow sprit

Hi al i have a bertram 18 and i would like to make bow sprit so i can leave my anchor on it as later on Im going to put an anchor winch on but i dont no where to start. Any help will be great.

Are you looking to just add a bolt on " bow pulpit" or do you want it molded into the hull? Pics of your boat might help.

 

[bertram18]

Re: howo make a fiber glass bow sprit

I was trying to mould one up then put a roller on it for my anchor to run over. I'll try get some photos up soon

 

[chriscraft254]

Re: howo make a fiber glass bow sprit

Here is a link to a guy that is doing a total rebuild on an old boat. Somewhere in his thread, you will find where he added a molded in bow pulpit. Page nine has a short explaination of how it was made and installed. http://www.thehulltruth.com/boating-forum/340930-new-boat.html

 

[Yacht Dr.]

Re: howo make a fiber glass bow sprit

A custom bow sprit that overhangs your bow deck is not that hard.

The hard part is connecting the mod to your boat.

An 18' boat might be a little under structured to do this without modifications to your current deck/hull bow joint.

An additional Winch mounted on the bow/deck would further complicate things.

It is possible..but not really cost effective IMO.

YD.