i command gauges

[snap2]

i have a 2009 etec 130 hp with i-command gauges i have disconnected all power to the motor and gauges for a week now i have
connected it all back to power and now my gauges light up but no engine hours or any thing else when i turn the key on all help is needed
cheers snap

 

[dingbat]

i have a 2009 etec 130 hp with i-command gauges i have disconnected all power to the motor and gauges for a week now i have
connected it all back to power and now my gauges light up but no engine hours or any thing else when i turn the key on all help is needed
cheers snap

Hopefully you disconnected battery power before disconnecting everything else.
ECM don't like to be connected or disconnected while "hot"

 

[snap2]

Hopefully you disconnected battery power before disconnecting everything else.
ECM don't like to be connected or disconnected while "hot"

yes i did

 

[saltchuckmatt]

I had one but never experienced that. Use this link to go where everyone goes when you have an etec issue.

Report back later with any findings. Good luck

Human Verification

www.etecownersgroup.com