is a 1989 johnson vro equipped with 'quick start'?

fshrgy99

Seaman
Joined
Jun 4, 2010
Messages
69
I want to use joe reeves timing method as found in the sticky. Is anyone on who can tell me if my motor has quick start feature? (I suppose I will go to the manual if I have to)
Thanks
fshrgy99
 

hidef

Lieutenant
Joined
Aug 22, 2009
Messages
1,465
Re: is a 1989 johnson vro equipped with 'quick start'?

Well quick start was available in 1989 but not knowing what model Johnson you are running makes it kind of tough to answer your question. Not all models had quick start.
 

fshrgy99

Seaman
Joined
Jun 4, 2010
Messages
69
Re: is a 1989 johnson vro equipped with 'quick start'?

ok ...sorry for suppying insufficient info. My motor is a 1989 johnson 140 vro cj140tlceb.
Thanks
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: is a 1989 johnson vro equipped with 'quick start'?

Yes, it has Quick Start. Follow Joe's method.
 

fshrgy99

Seaman
Joined
Jun 4, 2010
Messages
69
Re: is a 1989 johnson vro equipped with 'quick start'?

Hi retiredfornow,
I'm no expert and welcome correction ....quickstart is an auto timing advance on startup that causes a faster idler until the engine warms up (temp less than 96f). Since the timing when cold is affected Joe Reeves static timing method for setting the timing without the engine running will be affected. In other words the quickstart feature must be disconnected when using Joes method (from the sticky at the top of the forum). Now I am off to discover how to disable the quickstart. :)
fshrgy99
 

retiredfornow

Petty Officer 1st Class
Joined
May 9, 2011
Messages
355
Re: is a 1989 johnson vro equipped with 'quick start'?

Thanks, 99. Just wondering cause I used Joes timing method. I have a '88 60hp evinrude, and I don't think I have the quick start. If I do, it doesn't work and I can't find it in my factory manual.
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: is a 1989 johnson vro equipped with 'quick start'?

To disable QS ground out the white/black wire going to the port temp switch.
 
Top