Issue with air coming out of water intake.

cmorg02

Recruit
Joined
Nov 2, 2023
Messages
3
I have a 1977 9.9 Johnson. Third time started I notice air coming out of the water intake. Also water was coming out somewhere around the top end. I did not notice before. I did think I heard small pop from engine before I noticed issue. Tell tail was working. Thanks
 

Crosbyman

Vice Admiral
Joined
Nov 5, 2006
Messages
5,760
air or exhaust finding they way out the water intakes ?

pull the prop maybe normal exhaust flow outwards is blocked ?

is this a new sudden problem.... is this a new to you engine ...
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
38,675
Post some pictures or a video.-----Hard for me to think air can be coming out of the water intake !
 

F_R

Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Interesting. Of all the thousands of motors I've started in my life, I don't remember ever seeing air coming out the water intake when starting. Nor even looking for it.
 

cmorg02

Recruit
Joined
Nov 2, 2023
Messages
3
air or exhaust finding they way out the water intakes ?

pull the prop maybe normal exhaust flow outwards is blocked ?

is this a new sudden problem.... is this a new to you engine ...
New to me engine. Ran twice before I got it home. Was running after starter fix and I thought I heard a slight pop sound. I also notice water up high near where middle housing meets motor. Did not see first time I ran it. Could it be exhaust pushing into the water and exhaust plate.
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
38,675
This is going to require a video or some pictures.----Need to show where you think air is coming out.
 

flashback

Rear Admiral
Joined
Jun 28, 2002
Messages
4,005
I love it, air is not coming from any motor I know of. You see exhaust bubbles but not air.
 

cmorg02

Recruit
Joined
Nov 2, 2023
Messages
3
Yes most likely exhaust which is air. It comes out the water intake to pump. I believe a gasket might have blown out. Just looking if sometime else. Water coming out also below motor between motor housing and lower end.
 

Crosbyman

Vice Admiral
Joined
Nov 5, 2006
Messages
5,760
I think you need the drop the GC and perform a colonosscopy up the exhaust housing

make certain the housing seals against the GC exhaust vaity ...try a sealant when reinstalling the GC.
 
Top