J90 MLCRD-'84 XFlow. Upper water tube grommet part #.

[rebuilt]

Neither marineengine.com nor brp parts show a grommet at the top of the tube. They both show a fitting at the bottom. Does anyone have a part # for the rubber fitting at the top of the tube where it goes into the inner exhaust housing mounting plate?

https://www.marineengine.com/parts/johnson-evinrude-parts.php/?year=1984&hp=90&model=J90MLCRD

 

[racerone]

Wild guess on my part-----Item #28

 

[Mc Tool]

measure the dia of the hole in the plate , then the tube and then go to your hardware store and buy that size gromet .

 

[saltchuckmatt]

Neither marineengine.com nor brp parts show a grommet at the top of the tube. They both show a fitting at the bottom. Does anyone have a part # for the rubber fitting at the top of the tube where it goes into the inner exhaust housing mounting plate?

https://www.marineengine.com/parts/johnson-evinrude-parts.php/?year=1984&hp=90&model=J90MLCRD

Anyone in your local area sell brp Evinrude parts? If not it depends what country you live in. Post your country.

 

[Scott Danforth]

look here. https://www.google.com/search?client=firefox-b-1-e&q=J90MLCRD+cooling+water+grommet

 

[racerone]

Did you find #28 on the parts page ?

 

[rebuilt]

look here. https://www.google.com/search?client=firefox-b-1-e&q=J90MLCRD+cooling+water+grommet

Did you find #28 on the parts page ?

It is part #28. Marineengine shows a close up of the new part. I didn't know exactly what it looked like until I got it out. I was trying to pre-buy using part # alone. Once I had my hands on it, it matches the pics for part # 305145 exactly. Found an NOS on eBay. On the way. Thanks,