Good afternoon everybody. Working on a Johnson 115 V4 2 stroke that I recently got up and running with help from this forum. Runs well. When on the water it runs great then the alarm starts sounding continuously then engine loses almost all power. Turn the key off then restart immediately and the engine once again has power for a little while until you go to give higher throttle. The VRO is no longer used and the tank is gone and just 50:1 is added to the tank. Engine doesn't seem to be overheating and the upper tube sends out a good continuous stream of water. the tack harness from the control is not connected to anything since it doesn't have a tack. But I'm wondering if one or more of those 3 wires need to be connected somewhere. Also is it normal for these to lose power when the alarm sounds?