Johnson Seahorse 5 1/2 HP

[NYBo]

I was recently given a 5 1/2 HP Johnson Seahorse. It wouldn't turn, but I have been able to free it up, and it is otherwise in surprisingly good shape. Using the Search function, I was able to determine it's a '57 (Model CD-14).

I will be converting it to a regular fuel pump setup (using the pump from the 6 HP Evinrude I was also given ).

There is no shear pin or rubber end cap for the prop. Any idea where I can get these?

 

[rwilso]

Re: Johnson Seahorse 5 1/2 HP

http://www.marineengine.com/parts/v...ntage-evinrude-johnson/377018/37701800001.htm
This is a link for a break down of your motor. you should be able to order the parts as for the shear pin you can get a stainless steel rod at H/depot and cut it to length cut an extra one and fasten it to one of your plug wires for a spare

 

[NYBo]

Re: Johnson Seahorse 5 1/2 HP

Thanks for the link!

I wonder if stainless would be too strong for a shear pin. Would brass be better?