Mas
Lieutenant Commander
- Joined
- Oct 3, 2006
- Messages
- 1,656
OK,
I want to replace the impeller in my TN...what do I need to remove? Since this is a neutral model, what linkage must be undone? I've removed all obvious bolts on the LU...but only the lower housing came off. I was hoping the upper plate with the neutral actuating arm would slide off too, but no luck. Either I'm missing something, or the drive shaft is stuck in the powerhead??
There is also a large screw above the LU that I'm guessing has something to do with the linkage...I removed it too, but nothing budged.
Any help?
Mas
I want to replace the impeller in my TN...what do I need to remove? Since this is a neutral model, what linkage must be undone? I've removed all obvious bolts on the LU...but only the lower housing came off. I was hoping the upper plate with the neutral actuating arm would slide off too, but no luck. Either I'm missing something, or the drive shaft is stuck in the powerhead??
There is also a large screw above the LU that I'm guessing has something to do with the linkage...I removed it too, but nothing budged.
Any help?
Mas
