johnson vro

[josip77]

hi
i have 2000,130 ps johnson,i think my VRO not work ok,guage is defect,and when drive WOT few minutes and put out spark i see oil on spark(i think they have toomuch oil),and if I put out oil piston from vro and close oil hole on vro ,works ok????
thanks

 

[josip77]

Re: johnson vro

hi
i have 2000,130 ps johnson,i think my VRO not work ok,guage is defect,and when drive WOT few minutes and put out spark i see oil on spark(i think they have toomuch oil),and if I put out oil piston from vro and close oil hole on vro ,works ok????i mean disable vro,put oil in gasoline(2%)
thanks

 

[rickdb1boat]

Re: johnson vro

Maybe you could rephrase that post.......................Over-oiling sounds like the problem. Usually a sign the VRO is going out or a fuel delivery problem....Or, any number of things without more info...

 

[josip77]

Re: johnson vro

hi
story is big-my englis bad,frist i see VRO have 4 wire,ground,+12v,signal for guage,and 4 i think signal for engine(rpm),on my guage light no oil flow when is VRO disconect, defect guage,i try put fuel mix after VRO in glass,and mix 2% in other glass -its looks VRO mix more oil....i bay glass spark(adjust with color burn in cilinder) for adjust fuel-air mixture in all 4 carburator,but when i try after 1 minute i dont see color burning ;oil on spark!! now i think diconnect VRO,oil piston put out ant close oil in VRO...i want ask is this work ok and is this good idea?
thanks