Lenco trim tab controller on bennett tabs.

[amanphoto]

Is there a way connect an lenco auto trim tab controller to Bennett trim tabs?


---
I am here: http://maps.google.com/maps?ll=43.239741,-77.503306

 

[barbosam]

Take a look on the lenco website there is a lot of good info there and I know they do have info on replacing bennett parts.

Sent from my myTouch_4G_Slide using Tapatalk

 

[Tabman]

Re: Lenco trim tab controller on bennett tabs.

If you have a Bennett Trim tab system you can of course install a Bennett Auto tab tab Control (ATC). Here is a link to more information, http://www.bennetttrimtabs.com/catalog.php?vID=167

I would be delighted to answer any questions you might have about it.

Tom McGow
Bennett Marine

 

[amanphoto]

Re: Lenco trim tab controller on bennett tabs.

The Bennett controller does not work when cornering. The Lenco controller has GPS and works when cornering.

 

[Tabman]

Re: Lenco trim tab controller on bennett tabs.

amanphoto,

As I always state I work for Bennett and I am a little biased

The Lenco Auto Tab Control does not work in a turn. If you watch the video on thier website they state, ?The Autoglide is designed is designed to read when you are in a turn, locks the system out so it?s not fighting you and keeps you level.?

This is the same thing that the Bennett system is designed to do. From our website FAQ for the Auto Tab Control, "The ATC analyzes and calculates attitude readings more than a thousand times per second. Since it averages the readings, it won?t over-correct in rough water or momentary weight shifts. It is programmed not to activate during sharp turns."