lifting ring

[cheesegrits]

I need to pull my 150 off my Aquasport 19-6. It is a 86 model motor. Is there an easy way to build a lifting ring that attaches to the flywheel. Looks like it takes three bolts. I don't see the need to buy a BRP one for ~100 bucks. I think the motor weighs about 390 lbs. I do have access to a chain hoist.
Thanks for any help.

 

[wilde1j]

Re: lifting ring

Install a harmonic balancer puller (< $20 at most auto parts stores) and loop under the puller. Use Gr8 bolts and washers to thread in to the flywheel.

 

[coolguy147]

Re: lifting ring

grade 8 washers too