live well

[Javelin JD]

OK everyone, you've led me to rebuild my carbs, install a new trolling motor, now I would like to tackle my live well issue. Both from and rear live wells work great on the manual setting, however when I swith it to the auto setting they stop filling and won't come on. Any ideas as to what this would be from or what the fix would be. Thanks

 

[glenn property of pam]

Re: live well

lots of ways it could be done so you are going to have to do a little rooting around to find out how it was done. Somewhere you should find a timing module it may be under the dash and it should have a dial or a switch that indicates number of seconds (normally they are mounted where you can adjust them and they also have a off setting). locate that/them. if you have one you will also have a relay somewhere. if you have 2 then you have one per live well. First thing to do is to make sure the timers are turned on then post back what you have found.